Holster Training Videos
Every setup, break-in, retention and draw walkthrough for your Urban Carry holster, in one place. Start with your holster line below, or search for the thing you are stuck on.
Holster feels too tight?
That is break-in, not a defect. Wrap your unloaded firearm in a thin cloth or bag, insert it, and leave it overnight. See Breaking In the Leather below.
Firearm feels loose?
Retention is adjustable. Turn the tension screw clockwise with a standard Phillips screwdriver. Never remove the screw. See Retention below.
LockLeather
Signature LockLeather. Set it up right, break it in, and set your retention level.
How LockLeather Works
What the click retention system is and why it locks the way it does.
OWB and IWB Carry
The two ways to wear it, and what changes between them.
First Use, Out of the Box
Do this before you carry. Five minutes, once.
Breaking In the Leather
Why a new holster is stiff, and the overnight fix.
Retention and Proper Drawing
Setting your retention level and drawing cleanly, IWB or OWB.
Retention in 30 Seconds
The short version, if you only have half a minute.
The Retention Clip in Full
Every adjustment on the retention clip, step by step.
Retention Clip: G3 and LockLeather
The same clip covered across both platforms.
Reholstering Safely
Putting the firearm back without rushing it.
Trigger Guard Requirements
What your trigger guard has to do for the holster to lock correctly.
G3 Total Concealment
The G3 platform, from first fitting through drawing, sitting and daily carry.
Meet the G3
An overview of the platform and what total concealment means.
OWB vs IWB vs BWB
The three most popular carry styles, compared side by side.
Quick Tips Before Buying
What to know before you order.
Confirming Your Size
Check you have the right size before you carry.
How the G3 Works
The mechanism in half a minute.
Attaching the Holster
Getting it onto your belt correctly.
Positioning the Holster
Where it sits, and why that matters.
Inserting the Firearm
Seating the gun properly every time.
Breaking In the Leather
The G3 break-in, start to finish.
Retention
Adjusting how tightly the G3 holds.
Drawing the Holster
The full draw, explained slowly.
Drawing One Handed
Clearing the holster with one hand.
Drawing While Seated
The draw from a chair or a driver's seat.
Drawing With a Belly
Adjusting the draw for your build.
Troubleshooting Your Draw
If the draw feels wrong, start here.
Reholstering
Putting it back, safely.
Uncomfortable When Sitting
The usual cause, and the fix.
If the Holster Feels Uncomfortable
Working through fit and position problems.
Clothing Recommendations
What to wear over it.
The Feed Ramp
What the feed ramp does.
G3 Tips: The Long Version
Every G3 tip in one sitting. Worth the fifteen minutes.
Belts, Clips and Attachment
How the holster attaches to you. The belt does more work than most people expect.
Using the Right Belt
Why a proper gun belt changes how the holster carries.
LockLeather: Attaching a Belt OWB
Threading and seating the belt for outside the waistband.
LockLeather: Attaching the IWB Clip
Fitting the inside the waistband belt clip.
No videos match that search. Try “retention”, “drawing”, “break-in” or “belt”.
Still stuck?
Call or text 888-661-5579, or email Support@UrbanCarryHolsters.com. We would rather talk you through it than have you carry a holster you are not confident in.
Checking fitment for a firearm? GunSize.com. Think something failed? Read the warranty and claim process.
Safety first. Never place a loaded firearm in a holster you have not first tested unloaded for proper fit. Please read the Consumer and Safety Information before carrying.